VK 801
VIROCK
Availability: | |
---|---|
1. Applications:
It is applied for open knitted fabrics. The knitting fabrics which are shrunk by the machine an reach a satisfactory pre-shrinkage and brightness effect. The fabrics also could get better hand feeling and stable dimension. It is used for following knitted fabrics: natural fibers, synthetic and mixed fibers, mercerized cotton, non-mercerized cotton, wool, jersey, jacquard etc.
2. Process:
Open width entry ---- Pre-Tensioner ---- Prestemer---- Selvedge stretching cylinders unit ---- Stave cylinder ---Screw expanding ---- Mechanical weft straightner ----- Feeding cylinder ---- Overfeeding device ----Main steamer --- Fabric supporting device --- Moisture device ---- Synchronism bar --- Shrinking unit ---- Exit.
3- Technical Specifications
Machine Width: 2400 mm
Working Width: 2200 mm
Shrunk ratio: 1-10%
Machine Speed: 0~40m/min
Power supply voltage: 380V 50/60Hz
Installed power: 22Kw
Air Pressure: above 6-8 Bar
Air consumption: 200kg/h
Steam feeding: 4 Bar
PLC: Omron
Frequency Converter: Schneider
Paint: Powder Coated
1. Applications:
It is applied for open knitted fabrics. The knitting fabrics which are shrunk by the machine an reach a satisfactory pre-shrinkage and brightness effect. The fabrics also could get better hand feeling and stable dimension. It is used for following knitted fabrics: natural fibers, synthetic and mixed fibers, mercerized cotton, non-mercerized cotton, wool, jersey, jacquard etc.
2. Process:
Open width entry ---- Pre-Tensioner ---- Prestemer---- Selvedge stretching cylinders unit ---- Stave cylinder ---Screw expanding ---- Mechanical weft straightner ----- Feeding cylinder ---- Overfeeding device ----Main steamer --- Fabric supporting device --- Moisture device ---- Synchronism bar --- Shrinking unit ---- Exit.
3- Technical Specifications
Machine Width: 2400 mm
Working Width: 2200 mm
Shrunk ratio: 1-10%
Machine Speed: 0~40m/min
Power supply voltage: 380V 50/60Hz
Installed power: 22Kw
Air Pressure: above 6-8 Bar
Air consumption: 200kg/h
Steam feeding: 4 Bar
PLC: Omron
Frequency Converter: Schneider
Paint: Powder Coated