 |
VK-2000
VIROCK
Product Details:
Place of Origin: | CHINA |
Brand Name: | VIROCK |
Certification: | ISO9001 |
Payment & Shipping Terms:
Minimum Order Quantity: | 1 SET | ||||
Price: | NEGOTIABLE | ||||
Packaging Details: | wooden case | ||||
Delivery Time: | 90 days | ||||
Payment Terms: | T/T， L/C | ||||
Supply Ability: | as required | ||||
| Fabric Hold By: | Pin/clip/combined | Main Drive System: | Single/double Drive | ||
Fabric Working Width: | As Required | Machine Painting: | Optional | ||
Heating Source: | Gas/oil/steam/eletricity | Rail Length: | 3/6 Meters | ||
Rail Type: | Horizontal | Cooling Type: | Air Cooling | ||
1)Technical Flow:
Open width entry --- Infrared center guider ---- 2-Roller Padder -- Infrared center guider --- Photoelectric Weft Strangtener – Overfeeding -- Edge Spreader, Infrared Edge Sensor -- Pin or Clip or Combied Pin-Clip -- Stentering Drying Chambers – Air-Jet Cooling -- -- Swing Outlet.
2) Stenter Application:
This machine is used for stretching, drying and setting the cotton, polyester,and man-made fabric.
Norminal width mm 1800~3600
working width mm 500~3400
Fabric holding pinning, clipping or Combined type
heating source Thermal Oil, Gas, Steam or Electricity
Fabric grammage g 150~500
Temperature of chamber ℃ 90~230
NO. of chamber: depends on customers’ option
3) Standard Features:
A- Overfeed Pinning Systems:
Proper pinning is the key to successful overfeed and yield control. Available options:
B- DRIVE The machine running with D.C. drive, main drive motor of padding mangle and Stenter are teps D.C. motors reduction gear box is coupled with the main motor of Stenter machine.
C- FINISHING Machine will be finished with red oxide putty & primmer paint and finally with 3 coats of industrial paint. Optionally finished with powder coating process.
D- IMPORTANT NOTE The length & width of the Stenter machine, no. of the chambers, HP. Of D.C. / A.C. motors varies according the buyers requirements operating manual wiring diagram of the control panel & foundation plan will be provided with the machine.
E- To keep tensionless in the whole processing.
Product Details:
Place of Origin: | CHINA |
Brand Name: | VIROCK |
Certification: | ISO9001 |
Payment & Shipping Terms:
Minimum Order Quantity: | 1 SET | ||||
Price: | NEGOTIABLE | ||||
Packaging Details: | wooden case | ||||
Delivery Time: | 90 days | ||||
Payment Terms: | T/T， L/C | ||||
Supply Ability: | as required | ||||
| Fabric Hold By: | Pin/clip/combined | Main Drive System: | Single/double Drive | ||
Fabric Working Width: | As Required | Machine Painting: | Optional | ||
Heating Source: | Gas/oil/steam/eletricity | Rail Length: | 3/6 Meters | ||
Rail Type: | Horizontal | Cooling Type: | Air Cooling | ||
1)Technical Flow:
Open width entry --- Infrared center guider ---- 2-Roller Padder -- Infrared center guider --- Photoelectric Weft Strangtener – Overfeeding -- Edge Spreader, Infrared Edge Sensor -- Pin or Clip or Combied Pin-Clip -- Stentering Drying Chambers – Air-Jet Cooling -- -- Swing Outlet.
2) Stenter Application:
This machine is used for stretching, drying and setting the cotton, polyester,and man-made fabric.
Norminal width mm 1800~3600
working width mm 500~3400
Fabric holding pinning, clipping or Combined type
heating source Thermal Oil, Gas, Steam or Electricity
Fabric grammage g 150~500
Temperature of chamber ℃ 90~230
NO. of chamber: depends on customers’ option
3) Standard Features:
A- Overfeed Pinning Systems:
Proper pinning is the key to successful overfeed and yield control. Available options:
B- DRIVE The machine running with D.C. drive, main drive motor of padding mangle and Stenter are teps D.C. motors reduction gear box is coupled with the main motor of Stenter machine.
C- FINISHING Machine will be finished with red oxide putty & primmer paint and finally with 3 coats of industrial paint. Optionally finished with powder coating process.
D- IMPORTANT NOTE The length & width of the Stenter machine, no. of the chambers, HP. Of D.C. / A.C. motors varies according the buyers requirements operating manual wiring diagram of the control panel & foundation plan will be provided with the machine.
E- To keep tensionless in the whole processing.
