VIROCK
Availability: | |
---|---|
1. Applications:
This production line suitable for polyester melt spinning process, uses bottle flakes or chips to produce solid polyester staples fiber. The line can be deivded into polyester spinning section & polyester processing section.
2. Spinning section:
2-1 Main production unit:
It is mainly composed of drying system, screw extruder, filter, spinning insulation box, heat medium circulation system, metering pump, metering pump transmission device, spinning pack, quenching system, take-up, haul-off unit, traction feeding and traverse system for fiber cans and so on.
2-2 Design basis: Basic design of spinning production line
-- Annual production capacity: 6000T
-- Finished fiber size: 1.67 Dtex
--Spinning bits: 8 bits
Spinning pitch: 650mm
--Spinneret specifications: φ 328mm
-- Metering pump specifications: 70cc/ R
-- Spinning speed
-- Mechanical speed: 500~1500m/min
-- Process speed: 500~1350m/min
-- Specification of fiber cans: 1000×1500mm
3. Processing section
3.1 Process flow
Precursor fiber tow → Creel & upper & lower guide frames → Oil immersion bath → 1st draw stand → bath draw chest → 2nd draw stand → steam draw chest → 3rd draw stand → stacker → tension frame →steam pre-heater → crimper → spreader → tensionless tow dryer → draw-off tension stand → cutter → baler for stapled fiber.
1. Applications:
This production line suitable for polyester melt spinning process, uses bottle flakes or chips to produce solid polyester staples fiber. The line can be deivded into polyester spinning section & polyester processing section.
2. Spinning section:
2-1 Main production unit:
It is mainly composed of drying system, screw extruder, filter, spinning insulation box, heat medium circulation system, metering pump, metering pump transmission device, spinning pack, quenching system, take-up, haul-off unit, traction feeding and traverse system for fiber cans and so on.
2-2 Design basis: Basic design of spinning production line
-- Annual production capacity: 6000T
-- Finished fiber size: 1.67 Dtex
--Spinning bits: 8 bits
Spinning pitch: 650mm
--Spinneret specifications: φ 328mm
-- Metering pump specifications: 70cc/ R
-- Spinning speed
-- Mechanical speed: 500~1500m/min
-- Process speed: 500~1350m/min
-- Specification of fiber cans: 1000×1500mm
3. Processing section
3.1 Process flow
Precursor fiber tow → Creel & upper & lower guide frames → Oil immersion bath → 1st draw stand → bath draw chest → 2nd draw stand → steam draw chest → 3rd draw stand → stacker → tension frame →steam pre-heater → crimper → spreader → tensionless tow dryer → draw-off tension stand → cutter → baler for stapled fiber.