 |
VK-NB
VIROCK
1. Main technical data:
| Fabric width range | 1200mm-3600mm |
| Roller width range | 1400mm-3800mm |
| Padder mangle | Finishing/Dyeing paddle |
| Padder roller quantity | Two/Three |
| Padder roller dia | 300mm |
| Chamber quantity | 2-15 pcs |
| Guide roller diameter | 125mm/150mm |
| Heating media | Thermal oil/Natural gas/Steam/Electricity or any two combined |
| Pinning motor | 0.75 Kw |
| Blower motor quantity in each chamber | 4pcs |
| Exhaust | customized |
2. Process:
Open width entry --- Fabric positioning device ----Infrared center guider ---- Padder --- Tension applicator ---- Infrared center guider ---- Expanding roller ---- Lower overfeeding screw expending ---Upper overfeeding --- Edge detecting & four-finger uncurler device--- Pinning-on ---- Chambers for heat setting ---Air cooling --- Pinning-off ---- End section --- Plaiting & batching.
3. Features of the Stenter machine:
1) Specially designed mechanism to prevent the fabric from coming off the pins in the chamber.
2) Multiple tension-free designs to meet various requirements in textile processing.
3) Utilizes an advanced electrical control system with internationally renowned brands like Siemens/Mitsubishi for PLC and HMI, Mitsubishi for inverters, E+L for selvedge tracing device and uncurler, and Maxon Gas Burner.
4) Equipped with a highly efficient heat exchanger or gas burner (Maxon, USA) that rapidly heats up the chamber to the desired temperature, reducing idle time and improving production efficiency.
5) Features a specially designed inner exhaust pipe that enhances energy saving.
1. Main technical data:
| Fabric width range | 1200mm-3600mm |
| Roller width range | 1400mm-3800mm |
| Padder mangle | Finishing/Dyeing paddle |
| Padder roller quantity | Two/Three |
| Padder roller dia | 300mm |
| Chamber quantity | 2-15 pcs |
| Guide roller diameter | 125mm/150mm |
| Heating media | Thermal oil/Natural gas/Steam/Electricity or any two combined |
| Pinning motor | 0.75 Kw |
| Blower motor quantity in each chamber | 4pcs |
| Exhaust | customized |
2. Process:
Open width entry --- Fabric positioning device ----Infrared center guider ---- Padder --- Tension applicator ---- Infrared center guider ---- Expanding roller ---- Lower overfeeding screw expending ---Upper overfeeding --- Edge detecting & four-finger uncurler device--- Pinning-on ---- Chambers for heat setting ---Air cooling --- Pinning-off ---- End section --- Plaiting & batching.
3. Features of the Stenter machine:
1) Specially designed mechanism to prevent the fabric from coming off the pins in the chamber.
2) Multiple tension-free designs to meet various requirements in textile processing.
3) Utilizes an advanced electrical control system with internationally renowned brands like Siemens/Mitsubishi for PLC and HMI, Mitsubishi for inverters, E+L for selvedge tracing device and uncurler, and Maxon Gas Burner.
4) Equipped with a highly efficient heat exchanger or gas burner (Maxon, USA) that rapidly heats up the chamber to the desired temperature, reducing idle time and improving production efficiency.
5) Features a specially designed inner exhaust pipe that enhances energy saving.
