 |
VK-NB
VIROCK
8451
1. Technical details:
| Machine width: | 1000-3800mm | Fabric width: | 800-3600mm |
| Heating source: | gas /thermal oil / electricity / steam | Width adjustment range: | 700-3600mm |
Chambers quantity. | customised | Temperature of chamber: | 100-230℃ |
| Fabric held by: | clip/pin/combined | Air pressure: | above 0.5mpa |
| Overfeed range: | -10% to 80% | Installed power: | It depends on the specifications |
2. Production Processing:
A frame entry --- Padding & tension controlled --- Lower overfeeding ---Screw expending ---Upper overfeeding --- Edge detecting --- Pinning on--- Chambers for heat setting ---Air cooling --- Pinning off ---- End section --- Batching
1) Special designed anti-pin off device to avoid the special fabric off pin in the chamber.
2) Many tension-free designs to meet some textile processing requirement.
3) Advanced Electrical Control system;all the electrical control components are used the international famous brand, such as Siemen/Mistubishi PLC and HMI, Mistubishi inverter, E+L selvedge tracing device and uncurler, Maxon Gas Burner etc.
4) Equipped with high Efficiency Heat Exchanger or Gas burner ( Maxon, USA), which quickly heat up the chamber temperature to the setting temperature, and greatly reduce the dull time and achieve production efficiency.
5) Special designed inner exhaust pipe enhanced the energy saving.
1. Technical details:
| Machine width: | 1000-3800mm | Fabric width: | 800-3600mm |
| Heating source: | gas /thermal oil / electricity / steam | Width adjustment range: | 700-3600mm |
Chambers quantity. | customised | Temperature of chamber: | 100-230℃ |
| Fabric held by: | clip/pin/combined | Air pressure: | above 0.5mpa |
| Overfeed range: | -10% to 80% | Installed power: | It depends on the specifications |
2. Production Processing:
A frame entry --- Padding & tension controlled --- Lower overfeeding ---Screw expending ---Upper overfeeding --- Edge detecting --- Pinning on--- Chambers for heat setting ---Air cooling --- Pinning off ---- End section --- Batching
1) Special designed anti-pin off device to avoid the special fabric off pin in the chamber.
2) Many tension-free designs to meet some textile processing requirement.
3) Advanced Electrical Control system;all the electrical control components are used the international famous brand, such as Siemen/Mistubishi PLC and HMI, Mistubishi inverter, E+L selvedge tracing device and uncurler, Maxon Gas Burner etc.
4) Equipped with high Efficiency Heat Exchanger or Gas burner ( Maxon, USA), which quickly heat up the chamber temperature to the setting temperature, and greatly reduce the dull time and achieve production efficiency.
5) Special designed inner exhaust pipe enhanced the energy saving.
